簡介:


[已通過安全檢測]卡巴斯基反病毒Personal Pro 5.0.390 病毒庫:2005.11.21
[已通過安裝測試]WinXP+SP2+VMware
軟件版權歸原作者及原軟件公司所有，如果你喜歡，請購買正版軟件
共享服務時間:每天:8點至23點
共享服務器:R2服務器
軟件名稱：Mac OS X Tiger
版本號： 10.4.3 破解版
軟件語言： 英文/簡體中文
軟件介紹：
11.28日又發布了1.1a補丁包，這下以前不能安裝的8XX板也可以安裝了。
地址如下：http://www7.rapidupload.com/file.php?filepath=1416
用這個一個補丁包給UlraISO轉換後的ISO文件打一次補丁後就可以安裝了！
大家有什麼疑問，可以在PearPC中文站來，這裡有許多網友安裝成功的經驗可供參考
　
以下是11.26日最新官方修補說明：
Maxxuss DVD/ISO Patcher for 10.4.3 x86 (8F1099)
This is the second release (v1.1) of my DVD/ISO Patcher. It will modify an ISO image of the Mac OS 10.4.3 x86 (Build 8F1099) DTK DVD. The result is a fully working ISO from which you can install Mac OS X on your system.
The minimum requirement for running Mac OS X 10.4.3 x86 is a CPU with SSE2 and PAE. See also my discussion on these confusing CPU features.
Contents of the DVD/ISO Patcher
The Patcher puts all the required patches for 10.4.3 and also some kernel extensions for better hardware support on the ISO. Here s the complete list:
Maxxuss Boot Loader Patch (applied to ISO)
Maxxuss Mach Kernel Patch v0.3 and, for non-NX/XD CPUs, v0.3b
Maxxuss Anti-TPM Patch v1.0: oah750, oah750d
Kernel Extensions:
ApplePS2Controller (keyboard, mouse, trackpad),
AppleGenericPCATA.kext,
AppleOnboardPCATA.kext (with NForce deviceIDs),
AppleAC97Audio.kext (with NForce deviceIDs) and Maxxuss VMWare Sound Driver,
Maxxuss VMWare Network Driver.
removes AppleTPMACPI and AppleFPMemDriver kernel extensions.
Most of these files are also contained in an installation package MaxxussPatches.pkg on the ISO , which is automatically installed during the Mac OS X installation procedure. So you do not have to do anything special before, during and afterwards.
Changelog
Added since v1.0: Kernel v0.3b (was v1.0_addon), broader NForce device support, Audio drivers.
Downloads
The download of the DVD/ISO Patcher v1.1 is available from these locations as a ZIP archive (~ 45 MB):
www.rapidshare.de
www.rapidupload.com
How to use the Patcher
Preparation of the ISO Image file
Convert the DMG to an ISO file. I used UltraISO v7.6.1125 (ed2k link) and clicked on Tools - Convert to Standard ISO .
The MD5 (output of md5sum) of my DMG image file is: daf72f000bd860360ae494d915058af6 ( 10.4.3_8f1099_for_dtk_userdvd.dmg ).
The MD5 of my ISO image file is: e7d86fefb4b5155890addbf7fae19398
(If yours differ, you still may give it a try as the patcher does not validate and would proceed even in case of different binaries).
Patching the ISO Image file
The Patcher file (.ppf) serves as an input for the PPF 3.0 patcher software. It is available for Windows, Linux and Mac OS X. For Mac, to prevent it from crashing, double-click the .ppf file (which starts PPF), then select ISO image and apply patch. There s also the command-line version and a Java version available.
Booting and Installing
The patched ISO image contains three different Mach Kernels. You need to boot the patched DVD/ISO with the right kernel for your CPU needs:
mach_kernel (default): same as mach_kernel.nonx,
mach_kernel.sse2: supports SSE2 CPUs, requires NX/XD CPU support,
mach_kernel.nonx: supports SSE2 CPUs, does not require NX/XD CPU support,
mach_kernel.orig: the original kernel, for use with SSE3 CPUs with NX/XD support.
If you re fine with the default kernel, there is nothing to do and can simply hit Return at the Darwin Boot prompt. But if you require for example mach_kernel.sse2 , then you should enter mach_kernel.sse2 .
Problems and Workarounds
Some users have noted they get the error Cannot load /com.apple.Boot.plist after the boot prompt. This should help: Enter the boot promt and hit Return or a boot option.
If have made it past the boot promt and the system loads for a while but then hangs and nothing seems to happen anymore, don t give up Just wait a while, up to 5 minutes. It s often seen (usually in VMWare) that the DVD drive virtualization causes these stalls, but the system resumes after a while.
If nothing helps, use boot options -v -s (additionally to your kernel selection) and see what is printed to the console. The -s option should get you into single-user mode. If you can get here, press Ctrl-D to resume the boot procedure. If nothing works, make a note of the console output and visit the forums.
Booting from the Installed Mac OS X Volume
After the installation has succeeded, you can now boot your new system. As before, there are several kernels available for your CPU needs (see the list above: mach_kernel, mach_kernel.sse2, mach_kernel.nonx and mach_kernel.orig.
To select your kernel of choice, you have several options:
Enter the name at the boot promt, e.g. mach_kernel.nonx ,
As root or with sudo copy the kernel file to mach_kernel , e.g. cp /mach_kernel.sse2 /mach_kernel ,
As root or with sudo edit the file com.apple.Boot.plist in the folder /Library/Preferences/SystemConfiguration .
Notes
VMWare
If you boot Mac OS X 10.4.3 in VMWare please note:
Set paevm=true in your .vmx configuration file
Mount the ISO using Daemon Tools etc., not with the VMWare CD/DVD drive emulation.
If you tried everything but can t boot it NATIVE without a panic
User xtraa has found a great way to install Mac OS X 10.4.3 for native use. He uses VMWare to install to a physical partition and then boot natively from it. It seems to work for a lot of users. Make sure you check out his guide.
Something missing?
Some kernel extensions might be missing for your optimal hardware support. You should be able to put them into your working system afterwards (just copy to the /System/Library/Extensions folder). If something is missing, please send me a private message (PM) at the Mac OS X86 forum. Please also send me a PM if you can provide something, e.g. new kernel extensions or modifications to existing ones to support a broader range of device variants.
Here s a list of Maxxuss releases not included in the DVD/ISO Patcher v1.1. However, I ve prepared them for easy installation:
SSE3- SSE2 Additional Patch for 10.4.3 v1
Alternative DVD/ISO Patchers
You might also check out other DVD/ISO patchers. For example, in this forum thread the users EtherealRemnant, pianoman, myzar and wesley are providing an alternative installer (InstallerPatchv3.zip). Also look for Patcher and Kernel extension releases from forum users like macgirl etc.
安裝簡介（如下說明為單硬盤XP（2K/2K3）和MAC共存安裝）：
一、下載後，將第一個DMG文件用最新版UltraISO7.6.5轉換為ISO文件，要確保轉換後的ISO文件的MD5值為：
　
　　e7d86fefb4b5155890addbf7fae19398　　（切記一定要做MD5校驗）
如果MD5值和這個不一樣，則說明你的DMG文件已經損壞或不是10.4.3，則需從eMule修復下載或重新下載。
則不能應用這個補丁包。
二、然後下載PPF-O-Matic 3.0這個工具，將下載的補丁包解壓，解壓後是PPF文件，用下載的PPF-O-Matic 3.0給你轉換的ISO文件打補丁。
三、VM安裝，這個步驟較復雜，只能簡說一下，安裝方法很多，只能擇其一說一下。
　　用VM（好像5.0以上版本）安裝，既可以安裝在客戶機上，也可以安裝在實體機上。
　　在客戶機上安裝非常簡單，就不說了。
　　用VM安裝在實體機上，網上也已經很多了，就簡單說一下。
(1) 在裝之前，用PQ8分區大師（最好漢化的）先分出一個6G以上（一般10G以上最好）空白分區，分區切記一定要在擴展分區之前，否則不能安裝。
(2) 然後創建主分區：
　　
　　＃在PQ中創建主分區，要選擇未格式化的主分區，然後再打開PQ目錄下的PTEDIT32.EXE，將要安裝MAC的空白分區的類型改為AF（所在分區的第一個框）。
　　或者＃也可以用XP下的DISKPART工具來更改分區類型符（較麻煩），在PQ分出空白分區(1)之後，執行：
　　　　DISKPART
　　　　SELECT DISK 0（本說明只講單硬盤，如果為雙硬盤的第二個，則為DISK 1）
　　　　SELECT PARTITION X(X為你的空白分區號，可用LIST PARTITION 來查看號碼)
　　　　CREATE partition primary ID=AF
　這樣就建立了一個分區類型為AF（HFS）的MAC分區了。
(3) 要裝上DEAMON　TOOL虛擬光驅，將轉換好的ISO文件導入虛擬光驅中。
在VM中新建客戶機，一路選擇其它，內存越大越好，客戶機建立後，在配置中刪除虛擬硬盤，然後添加硬盤設備，將剛分出的MAC分區選擇上。
(4)　之後用記事本打開你的VM虛擬機下的.vmx配置文件，添加一行：paevm=true
之所以這樣，是因為10.4.3版的Tiger要求CPU的PAE(Physical Address Extension)支持（用HWINF32可以查看），所以沒有PAE的機子還是用VM安裝。
(5) 之後啟動VM，將DEAMON　TOOL的光驅導入VM光驅中，啟動安裝。
如果出現 Cannot load /com.apple.Boot.plist 這樣的錯誤信息,可以在啟動提示時按F8然後輸入：
代碼:
kernel=mach_kernel.xxx
其中 xxx 對應不同的kernel（只針對下載Maxxuss的kernel）。
進入設置，選擇你適合的內核設置，有如下幾種內核選擇:
　　　　 　mach_kernel (默認): 同 mach_kernel.sse2　一樣
　　　　　 mach_kernel.sse2: 支持 SSE2 CPUs, 需 NX/XD CPU 支持（在XP中可以打開控制面板－系統
　　　　　　　　　　　　　　　　－高級－數據執行保護，看你的CPU是不是支持DEP，支持DEP就有NX/XD）
　　　　　mach_kernel.nonx: 支持 SSE2 CPUs, 不需要 NX/XD CPU 支持
　　　　　mach_kernel.orig: 原來的內核, SSE3 CPUs 帶 NX/XD 支持的
(6) 在進入安裝界面後，選擇上面的disk utility，將要安裝的分區（會突顯）erase，然後安裝就可以了。
之後就可以盡情享受了MAC了。
　第一個DMG文件如果大家下的很慢，可以用BT種子，點此下載。
　第二個補丁包程序如果在電驢上下載較慢，可以在如下站點下載：
www.rapidupload.com
www.rapidshare.de
具體安裝方法很多，大家可以用GOOGLE搜索一下！
有些騾友提了很多問題，確實很白

其實我懂的也不是太多，盡能力總結答復一下：
只有是SSE2　或　SSE3的機子，AMD的機子是兼容SSE2/SSE3的，也應該都是可以安裝的。
MAC Tiger可以實體安裝，也可以用VM模擬安裝做客戶機，在VM上安裝時，要在.vmx配置文件上加上一行 paevm=true 。先將ISO文件導入Daemon Tools 虛擬光驅中, 不要用 VMWare CD/DVD 光盤驅動器模擬.
實體刻盤安裝，要機子支持PAE，所以還是建議在VM中安裝，然後在實體中運行。
這個版本的MAC是至今為止，中文化程度最好的一個，性能的提升也是最好的。
MAC上的軟件相當豐富，只要你努力去搜尋，因為MAC機本來是專於多媒體，所以這方面的軟件很多。
這個補丁是第一版的，以後還會繼續完善，只要能裝上，以後升級補丁可以單獨下，然後在MAC中打補丁也是一樣的。
MAC系統不光是界面好，而且裝在PC上啟動運行也是相當快的，反正在我的本本上比XP要快，並不是像人所說的，裝在PC上很慢。這個補丁包就是可以保證性能的！
其補丁的具體細節如下：
Maxxuss DVD/ISO Patcher for 10.4.3 x86
This is the first version (v1.0) of my DVD/ISO Patcher. It
will modify an ISO image of the Mac OS 10.4.3 x86 DTK (8F1099) DVD. This results
in a fully working ISO from which you can install Mac OS X on your system.
Contents of the DVD/ISO Patcher
此補丁包包括10.4.3的全部補丁和一些能更好的硬件支持的內核擴展.
列表包括如下:
Boot Loader Patch (applied to ISO)
Mach Kernel v0.3
Anti-TPM Patch v1.0: oah750, oah750d
內核擴展:
ApplePS2Controller (更好的支持　PS2鍵盤, PS2鼠標, trackpad),
AppleGenericPCATA.kext,
AppleOnboardPCATA.kext,
Maxxuss VMWare Network Driver.
　remove AppleTPMACPI and AppleFPMemDriver 內核擴展.
在ISO上這些文件由一個安裝包 MaxxussPatches.pkg 在安裝系統時自動進行安裝.
So you do not have to do anything special before, during and afterwards.
補丁包下載（可在此下載第二個文件）：
ZIP文檔 (大約~ 45MB):
www.rapidupload.com
www.rapidshare.de
如何使用補丁包
用UltraISO v7.6.5轉換 DMG 為　ISO 文件。
DMG轉換為ISO文件 10.4.3_8f1099_for_dtk_userdvd.iso 後的 MD5 值為:
e7d86fefb4b5155890addbf7fae19398
(如果MD5值不一樣, 將不會得到一個有效的文件).
補丁文件 (.ppf) 打補丁程序在 PPF 3.0 patcher software下載. It is available for Windows, Linux and Mac OS X.
Notes　
啟動時出現錯誤信息
如果出現 Cannot load /com.apple.Boot.plist 這樣的錯誤信息,可以在啟動提示時按回車或進入設置，選擇你適合的內核設置，有如下幾種內核:
mach_kernel (默認t): same as mach_kernel.sse2
mach_kernel.sse2: supports SSE2 CPUs, requires NX/XD CPU
support
mach_kernel.nonx: supports SSE2 CPUs, does not require
NX/XD CPU support
mach_kernel.orig: the original kernel, for use with SSE3
CPUs with NX/XD support
To select your kernel of choice, either
enter the name at the boot promt, e.g. mach_kernel.nonx ,
as root or with sudo copy the kernel file to mach_kernel , e.g. SPAN
class=code cp /mach_kernel.nonx /mach_kernel ,
or as root or with sudo edit the file com.apple.Boot.plist in the
folder /Library/Preferences/SystemConfiguration .
VMWare
If you install Mac OS X as a guest in VMWare please note:
Set paevm=true in your .vmx configuration file
Mount the ISO using Daemon Tools etc., not with the VMWare CD/DVD drive
emulation.
Something missing?
Some kernel extensions might be missing for your optimal hardware support.
You should be able to put them into your working system afterwards (just copy to
the /System/Library/Extensions folder). I know of the following and will include
them as soon as possible.
NForce4 (broader card support)
AC97 Sound
If something is missing, please send me a private message (PM) at the Mac OS
X86 forum http://win2osx.net/forum.
Please also send me a PM if you can provide something, e.g. new kernel
extensions or modifications to existing ones to support a broader range of
device variants.
Alternative DVD/ISO Patchers
You might also check out other DVD/ISO patchers. For example, in http://win2osx.net/forum/showthread.php?t=1650,
the users EtherealRemnant, pianoman, myzar and wesley are providing an
alternative installer with support for NForce 4 410 (InstallerPatchv3.zip).
Also look for Patcher and Kernel extension releases from forum users like
macgirl etc.